Regular Customer Returns from the West with the Goodies!

Just had a prospector drop into the shop after 10 days detecting in Western Australia. He showed us this 112 gram beauty.

It was detected at approximately a foot and half by a Nugget Finder 17” x 11” Mono Coil using a Minelab GPX 4500 Metal Detector.

All the nuggets pictured were found in a line.

It was his first trip over to Western Australia, Not a bad effort for his trip over.

112 gram Nugget Found in WAGold Nugget Finds from a WA Gold Prospecting Trip

David’s WA Gold Prospecting Adventure

On the 8th of June my cousin and I were off to Kalgoorlie WA for the gold prospecting adventure of a lifetime. After 3 days of driving from Melbourne, stopping at Port Augusta and Eucla we arrived at Kalgoorlie.
At the Superpit we met our guide and our fellow prospector from Ballarat. We drove north from Kalgoorlie and set up camp in a shearing shed, as the weather forecast was for some showers. We started gold detecting on some pushings (an area where gold had been found before and the area had been bulldozed). By nightfall my cousin and I had both found gold.
In the morning we would detect new ground, looking for patches and in the afternoon we would detect the pushings. We found gold every day.
One of the highlights for me was about half way through the 12 day tour when I got a definite but not loud signal using my Minelab GPX 4500 metal detector under a bush. The soil was very soft with small stones in it. I dug down about 30cm and putting the detector in the hole realised the target was on the side of it. I had already dug it out. Picking up some of the dirt with my hand I felt something heavy. It turned out to be a beautiful 21 gram gold nugget. As a result, we spent quite a bit of time around there and found 2 other small pieces.
On another day my cousin found a small patch that yielded about 15 pieces for about 20 grams. During the trip we learnt different ways to tune our detectors and what ground conditions to look for.
On the way home, south of Kalgoorlie, we had a chance to get onto a mining company’s lease. We put our new learned skills into practice and found 2 gold pieces coming in at just under 10 grams. By the end of the trip we had detected for about 60 hours (12 days) and found 75 pieces of gold weighing 100 grams.

What a great time we had.
David

Jack and Jill’s Western Australia Gold Prospecting Adventure

Have you ever considered a gold prospecting trip to outback Western Australia?

Not sure what to expect? Where to go? What to take? Is there any gold still to be found?

We have been asked to share our diary of day to day life on the goldfields over this winter. We plan to remain anonymous, and have chosen the “nom de plumes” Jack and Jill. This seems appropriate as we have “climbed up the hill” many times each week in search of any remaining nuggets scattered amongst the ironstone and quartz rocks which typify the WA goldfields.

Now, to go back to the start of this adventure! With caravan and 4 wheel drive loaded, and high expectations, we crossed the border into South Australia and camped at a roadside stop for the first night. For Jill, much of the first day was spent mentally confirming that nothing necessary was left behind. Yes, Miners’ Rights, maps, medication, water containers, detector spares, tools, tyre repair kit, and various replacement parts for the vehicle, were all present. Jack’s thoughts were centred around the comparative cost of diesel this year, and which days we would have a tail wind, to reduce fuel consumption.  Generally speaking, the increase proved to be only marginal. The top price we paid was $1.94 at Belladonia.

Due to the abundance of wild life – kangaroos, wombats, emus, and camels, we chose to drive only in daylight hours, and by the third night, were almost to the WA border. As usual, fruit and vegetables, honey, nuts, polystyrene boxes and seeds could not be taken into WA, and this year, car mats were inspected for grass seeds, as well!

The fourth night’s roadside camp was between Norseman and Kalgoorlie, and by the fifth night we were on the goldfields, a few hundred kilometres north of Kalgoorlie. One of the first things we noticed was that not all of WA’s wildflowers wait for spring – some were already flowering in May.

The only minor hiccup for the trip was Jack leaving the water buckets at a service station in Kalgoorlie after removing them from the van boot, to use the hose and replenish the water supply. This would not have been worthy of note, except that the outback town en route had neither buckets, nor replacement cassette toilet chemicals, which had been stored in the buckets.

With much anticipation, the Minelab GPX 5000 metal detectors were set up, and our gold prospecting holiday had begun. The first day proved fruitless for Jill, but Jack could boast of two small pieces weighing in total .7 gram. It was encouraging however, to meet up with a friend who had been swinging his metal detector in the area for a couple of weeks, and had been quite successful – yes, there is still gold to be found in WA.

By the way, he mentioned that we were the first people he had spoken to for two weeks.

We will keep you up to date, as the trip unfolds. Hopefully, the “big one” that we all dream about, will be part of the next instalment.

Minelab CTX 3030 Treasure Detector Updates

With the release of the new Minelab CTX 3030 Treasure Detector, there have been a number of enquiries regarding some issues with the new detector. We would like to pass on the following information regarding updates to the Minelab CTX 3030:

New Software Downloads
It has been found that some computers may not be compatible with the first version software issued on detectors. This will mainly affect the ability to translate into some non- standard A-Z English characters. Anyone experiencing this issue can access the following website to download the updated software:
http://www.minelab.com/aus/customer-care/product-notices?article=93336

Detector intermittently switching itself off
There is also a new software fix for anyone experiencing their detector switching itself off. Details of the new software update to fix this issue can be found at:
http://www.minelab.com/aus/customer-care/product-notices?article=95728

Discolouration of screws
Some customers have been experiencing a discolouration of the detector screws after immersion of the CTX 3030 in salt water. We would like to let you know that if this happens it is quite normal and is not a rusting or deterioration of the screws. For further information please visit:
http://www.minelab.com/aus/customer-care/product-notices?article=95731

CTX Audio Options
If you would like to find out more information regarding the Minelab CTX 3030 audio options please visit the following site for an in-depth article explaining the audio options available:
http://www.minelab.com/__files/f/93182/KBA_21-1-CTX-3030-Audio-Options.pdf

As always our helpful and Minelab certified staff at Miners Den Australia are available to help you with any other enquiries you may have regarding the Minelab CTX 3030. To contact us please see our store locations and contact details at the bottom of the page for your nearest dealer.

Welcome to The Miners Den Australia Blog

The Miners Den Australia Blog is the first choice for prospectors Australia wide to keep up to date with the latest information relating to Adventure, Treasure & Gold Prospecting hobbies. Backed by Australia’s only network of Premium Minelab Metal Detector Superstores, across three states, and a team of Minelab certified staff we are sure to be the first to let you know about important updates, interesting stories and informed comments about the products you are using or thinking of purchasing